smartd.conf.j2 7.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154
  1. {% if ansible_prolog -%}
  2. {% from 'templates/ansible/prolog.j2' import prolog with context %}
  3. {{ prolog() }}
  4. {% endif -%}
  5. # /etc/smartd.conf
  6. # Configuration file for smartd. Use "man smartd.conf" for more information.
  7. # Home page is: http://smartmontools.sourceforge.net
  8. # smartd will re-read the configuration file if it receives a HUP
  9. # signal
  10. # The file gives a list of devices to monitor using smartd, with one
  11. # device per line. Text after a hash (#) is ignored, and you may use
  12. # spaces and tabs for white space. You may use '\' to continue lines.
  13. # You can usually identify which hard disks are on your system by
  14. # looking in /proc/ide and in /proc/scsi.
  15. # The word DEVICESCAN will cause any remaining lines in this
  16. # configuration file to be ignored: it tells smartd to scan for all
  17. # ATA and SCSI devices. DEVICESCAN may be followed by any of the
  18. # Directives listed below, which will be applied to all devices that
  19. # are found. Most users should comment out DEVICESCAN and explicitly
  20. # list the devices that they wish to monitor.
  21. #DEVICESCAN -d removable -n standby -m root -M exec /usr/share/smartmontools/smartd-runner
  22. DEVICESCAN -H -l error -l selftest -t -f -m root -M exec /usr/share/smartmontools/smartd-runner -s (S/../.././02|L/../../6/03)
  23. # Alternative setting to ignore temperature and power-on hours reports
  24. # in syslog.
  25. #DEVICESCAN -I 194 -I 231 -I 9
  26. # Alternative setting to report more useful raw temperature in syslog.
  27. #DEVICESCAN -R 194 -R 231 -I 9
  28. # Alternative setting to report raw temperature changes >= 5 Celsius
  29. # and min/max temperatures.
  30. #DEVICESCAN -I 194 -I 231 -I 9 -W 5
  31. # First (primary) ATA/IDE hard disk. Monitor all attributes, enable
  32. # automatic online data collection, automatic Attribute autosave, and
  33. # start a short self-test every day between 2-3am, and a long self test
  34. # Saturdays between 3-4am.
  35. #/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
  36. # Monitor SMART status, ATA Error Log, Self-test log, and track
  37. # changes in all attributes except for attribute 194
  38. #/dev/hdb -H -l error -l selftest -t -I 194
  39. # Monitor all attributes except normalized Temperature (usually 194),
  40. # but track Temperature changes >= 4 Celsius, report Temperatures
  41. # >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
  42. # Send mail on SMART failures or when Temperature is >= 55 Celsius.
  43. #/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
  44. # An ATA disk may appear as a SCSI device to the OS. If a SCSI to
  45. # ATA Translation (SAT) layer is between the OS and the device then
  46. # this can be flagged with the '-d sat' option. This situation may
  47. # become common with SATA disks in SAS and FC environments.
  48. # /dev/sda -a -d sat
  49. # A very silent check. Only report SMART health status if it fails
  50. # But send an email in this case
  51. #/dev/hdc -H -C 0 -U 0 -m admin@example.com
  52. # First two SCSI disks. This will monitor everything that smartd can
  53. # monitor. Start extended self-tests Wednesdays between 6-7pm and
  54. # Sundays between 1-2 am
  55. #/dev/sda -d scsi -s L/../../3/18
  56. #/dev/sdb -d scsi -s L/../../7/01
  57. # Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
  58. # the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
  59. # and 4-5 am.
  60. # NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
  61. # is DEPRECATED. Use the /dev/tweN character device interface instead.
  62. # For example /dev/twe0, /dev/twe1, and so on.
  63. #/dev/sdc -d 3ware,0 -a -s L/../../7/01
  64. #/dev/sdc -d 3ware,1 -a -s L/../../7/02
  65. #/dev/sdc -d 3ware,2 -a -s L/../../7/03
  66. #/dev/sdc -d 3ware,3 -a -s L/../../7/04
  67. # Monitor 2 ATA disks connected to a 3ware 9000 controller which
  68. # uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
  69. # between 1-2 and 3-4 am.
  70. #/dev/twa0 -d 3ware,0 -a -s L/../../2/01
  71. #/dev/twa0 -d 3ware,1 -a -s L/../../2/03
  72. # Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
  73. # uses the 3w-sas driver (Linux, FreeBSD). Start long self-tests Tuesdays
  74. # between 1-2 and 3-4 am.
  75. #/dev/twl0 -d 3ware,0 -a -s L/../../2/01
  76. #/dev/twa0 -d 3ware,1 -a -s L/../../2/03
  77. # Same as above for Windows. Option '-d 3ware,N' is not necessary,
  78. # disk (port) number is specified in device name.
  79. # NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
  80. #/dev/hdc,0 -a -s L/../../2/01
  81. #/dev/hdc,1 -a -s L/../../2/03
  82. #
  83. # Monitor 2 disks connected to the first HP SmartArray controller which
  84. # uses the cciss driver. Start long tests on Sunday nights and short
  85. # self-tests every night and send errors to root
  86. #/dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
  87. #/dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
  88. # Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
  89. # self-tests Sundays between 1-2, 2-3, and 3-4 am.
  90. #/dev/sdd -d hpt,1/1 -a -s L/../../7/01
  91. #/dev/sdd -d hpt,1/2 -a -s L/../../7/02
  92. #/dev/sdd -d hpt,1/3 -a -s L/../../7/03
  93. # Monitor 2 ATA disks connected to the same PMPort which connected to the
  94. # HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
  95. #/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
  96. #/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
  97. # HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
  98. # PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
  99. #
  100. # -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
  101. # -T TYPE set the tolerance to one of: normal, permissive
  102. # -o VAL Enable/disable automatic offline tests (on/off)
  103. # -S VAL Enable/disable attribute autosave (on/off)
  104. # -n MODE No check. MODE is one of: never, sleep, standby, idle
  105. # -H Monitor SMART Health Status, report if failed
  106. # -l TYPE Monitor SMART log. Type is one of: error, selftest
  107. # -f Monitor for failure of any 'Usage' Attributes
  108. # -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
  109. # -M TYPE Modify email warning behavior (see man page)
  110. # -s REGE Start self-test when type/date matches regular expression (see man page)
  111. # -p Report changes in 'Prefailure' Normalized Attributes
  112. # -u Report changes in 'Usage' Normalized Attributes
  113. # -t Equivalent to -p and -u Directives
  114. # -r ID Also report Raw values of Attribute ID with -p, -u or -t
  115. # -R ID Track changes in Attribute ID Raw value with -p, -u or -t
  116. # -i ID Ignore Attribute ID for -f Directive
  117. # -I ID Ignore Attribute ID for -p, -u or -t Directive
  118. # -C ID Report if Current Pending Sector count non-zero
  119. # -U ID Report if Offline Uncorrectable count non-zero
  120. # -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
  121. # -v N,ST Modifies labeling of Attribute N (see man page)
  122. # -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
  123. # -F TYPE Use firmware bug workaround. Type is one of: none, samsung
  124. # -P TYPE Drive-specific presets: use, ignore, show, showall
  125. # # Comment: text after a hash sign is ignored
  126. # \ Line continuation character
  127. # Attribute ID is a decimal integer 1 <= ID <= 255
  128. # except for -C and -U, where ID = 0 turns them off.
  129. # All but -d, -m and -M Directives are only implemented for ATA devices
  130. #
  131. # If the test string DEVICESCAN is the first uncommented text
  132. # then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
  133. # DEVICESCAN may be followed by any desired Directives.